AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 65)

60
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
WOL
Enable this feature to allow the
display to be switched on over the
network.
Note:
• To enter this menu option, you
have to press the button once
followed by entering numbers
“1”, “6”, “6”, and “8” on the
remote control.
• Under the Network app, set the
Ethernet setting to On or Static
IP . Ensure that the Ethernet
cable is properly connected to
LAN port.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
Off
On
Configuration1
reset
Reset all settings in the
Configuration1 menu to the factory
preset values.
1 Press the / button on the
control panel or the / button
on the remote control to select
the setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
CANCEL
RESET
Factory reset
Reset all your customized settings
to the factory preset values.
1 Press the / button on the
control panel or the / button
on the remote control to select
the setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
CANCEL
RESET