AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 64)

59
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
Boot on source
Input: Input can be set to HDMI1,
HDMI2, HDMI3, DVI-I, DisplayPort,
VGA, SDM, or USB.
1 Press the button on the
control panel or the button
on the remote control to
uncheck the
Last Input option.
2 Press the / button on the
control panel or the / button on
the remote control to select the
Input option.
3 Press the button on the
control panel or the button
on the remote control to set the
value.
Note: If you set the input to USB
then continue with setting the Playlist
option in the following section
(Playlist). If you set another input
then follow steps 4 to 5.
4 Press the button on the
control panel or the button
on the remote control. Then
press the / button on the
control panel or the /
button
on the remote control to select
CANCEL or OK .
5 Press the button on the
control panel or the button
on the remote control to set the
value.
HDMI1
HDMI2
HDMI3
DVI-I
DisplayPort
VGA
SDM
USB
Playlist: Select playlist index
(PlayList "0" ~ PlayList "8") for USB
source.
Note: If the Autoplay option in
USB settings is enabled for video,
and PlayList "8" is selected, the
display will automatically play
the media content from the Root
folder of the external USB device.
To enable Autoplay, refer to “4.2.4
USB Menu Settings” on page 38.
1 Repeat steps 1 to 3 in the
previous (Input) section.
2 Press the button on the
control panel or the button on
the remote control. Then press
the / button on the control
panel or the / button on the
remote control to select the
playlist index.
3 Press the button on the
control panel or the button
on the remote control to set the
value.
4 Repeat steps 4 to 5 in the
previous (Input) section.
0 to 8
CANCEL
SAVE