AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 59)

54
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
Custom zoom
Use this function to further customize the zoom settings to suit the image you want to
display.
Note: Custom zoom option becomes available if you set the Zoom mode to Custom .
Zoom: Expand the horizontal
and vertical sizes of the image
simultaneously. 1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to enter
value adjustment menu.
3 Press the / button on the
control panel or the / button
on the remote control to adjust
the value.
Zoom
H Zoom
V Zoom
H position
V position
0 to 100
H Zoom: Expand the horizontal size
of the image only.
V Zoom: Expand the vertical size of
the image only.
H position: Move the horizontal
position of the image to the left or
to the right.
V position: Move the vertical
position of the image up or down.
Auto adjust
Use this function to automatically
optimize the display of VGA input
image.
Note: This option is available only if
the input source is VGA.
1 Press the / button on the
control panel or the / button
on the remote control to select
the setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
CANCEL
OK
Screen reset
Reset all settings in the Screen menu
to the factory preset values.
1 Press the / button on the
control panel or the / button
on the remote control to select
the setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
CANCEL
RESET