AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 20)

16
PRODUCT DESCRIPTION
1 [ ] Power
Turn the display on or put the display to
standby.
2 MUTE
Switch the audio mute ON/OFF.
3 INPUT
Choose the input source.
4 [ ] Increase
• Enter the submenu while OSD menu is
on.
• Increase the Volume level while OSD
menu is off.
5 [ ] Decrease
• Return to the previous menu while OSD
menu is on.
• Decrease the Volume level while OSD
menu is off.
6 [ ] Up
Move the highlight bar up to select an
option or increase the adjustment while
OSD menu is on.
7 [ ] Down
Move the highlight bar down to select an
option or decrease the adjustment while
OSD menu is on.
8 MENU
• Activate the OSD menu when OSD menu
is off.
• Hide the OSD menu while OSD menu is
on.
9
Remote control sensor and power status
indicator
• Receive command signals from the
remote control.
• Indicate the operating status of the
display:
- Lights green when the display is turned
on
- Lights red when the display is in standby
mode
- Blinks amber and red when “Advanced
option, Schedule” is enabled
- Blinks red when a failure has been
detected
- Lights off when the main power of the
display is turned off