AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 67)

62
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
Logo
Choose to enable or disable the
picture of Logo when you turn on
your LCD display.
Note:
• If Logo is set to On then the
OTS logo will show.
• If Log is set to Off then the
scalar OTS logo will not show.
• If Logo is set to User then there
will be no boot logo when power
on.
• Logo will not rotate with rotation
setting/detection.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
Off
On
User
Monitor ID
Adjust the ID number for controlling
the display via the LAN Control
connection. Each display must
have a unique ID number when
multiple sets of this display are
connected.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
3 Press the / button on the
control panel or the / button
on the remote control to adjust
the value.
1 to 255
Heat status View the thermal status of the LCD display.
Monitor
information
View the information about your
LCD display, including model
name, serial number, operation
hours, and software version.
N/A
DP version
Set the DP version to 1.1 or 1.2.
Note: This option is available only if
the input source is DisplayPort.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
1.1
1.2