AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 61)

56
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
Audio source
Select the audio input source.
Without video signal there is no
audio output.
• Analog: Audio from audio input.
• Digital : Audio from HDMI audio.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
Analog: VGA
/ DVI
Digital: HDMI
/ DP
Audio reset
Reset all settings in the Audio menu
to the factory preset values.
1 Press the / button on the
control panel or the / button
on the remote control to select
the setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
CANCEL
RESET
Audio Out Sync
Enable/disable audio out (line out)
volume adjustability to sync with
internal speakers.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
Off
On
Speaker Setting
Enable/disable the internal
speakers.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
Off
On