Epson WorkForce Pro WF-C8690 A3 Color MFP with PCL/PostScript - Manual (Page 78)

78
You see a screen like this:
3. Select Router , then select Start Setup , Change Settings , or Change to Wi-Fi connection ,
depending on your current connection settings.
4. Select Push Button Setup (WPS) .
5. Follow the instructions on the LCD screen to complete WPS setup.
6. Press the home button to exit.
You see the icon on the LCD screen and should be able to connect to your product directly from
your computer or device, and then print. If you are printing from a computer, make sure you installed
the network software as described on the
Start Here sheet.
Note: If you don't see the icon, repeat these steps to try again.
Parent topic: Wi-Fi Protected Setup (WPS)
Printing a Network Status Sheet
You can print a network status sheet to help you determine the causes of any problems you may have
using your product on a network.
1. Press the home button, if necessary.
2. Select Settings .
3. Select General Settings .