Paper loading capacity – Epson WorkForce Pro WF-C8690 A3 Color MFP with PCL/PostScript User Manual
Page 102
102
7.
Select the size and type of paper you loaded.
Always follow these paper loading guidelines:
• Load only the recommended number of sheets.
• Load paper short edge first, except when the long edge is set as the width of a user-defined paper
size.
• Load the printable side faceup.
• Load letterhead or pre-printed paper top edge first.
• Do not load paper above the arrow mark inside the edge guides.
• If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load one
envelope at a time.
• If print quality declines when printing multiple envelopes, try loading one envelope at a time.
• Do not load envelopes that are curled, folded, or too thin.
• Do not use envelopes with adhesive surfaces on the flaps or window envelopes.
• Check the paper package for any additional loading instructions.
Parent topic:
Related references
Paper Specifications
Paper Loading Capacity
Related tasks
Paper Loading Capacity
As described in the tables below, do not load paper in the paper cassettes above the arrow marks on the
side edge guides.
Standard and Thick Paper Capacity - Rear Paper Feed Slot
You can load up to the following number of standard paper (17 to 24 lb [64 to 90 g/m
2
]) sheets in the rear
paper feed slot:
• 85 sheets for available paper sizes* from A6 (4.1 × 5.8 inches [105 × 148 mm]) to Legal (8.5 × 14
inches [216 × 356 mm])
• 50 sheets for available paper sizes* 11 × 17 inches (279 × 432 mm) and larger