Epson WorkForce Pro WF-C8690 A3 Color MFP with PCL/PostScript - Manual (Page 376)

376
LCD screen message Condition/solution
Printer error. Turn the power off and
on again. If the problem persists,
contact Epson Support. Turn the product off and then back on again. If the error persists,
check for and remove any jammed paper or protective materials
from the product. If the error still persists, contact Epson for
support.
If you see any of the following error codes, make sure you have
not exceeded the loading capacity for any paper source:
• 000181
• 000184
• 000201
• 000204
• 000221
• 000224
Printer error. Contact Epson Support.
Non-printing features are available. The product may be damaged, but features such as scanning
are still available. Contact Epson for support.
Printer error. For details, see your
documentation. The product may be damaged. Contact Epson for support.
Paper out in XX. Load Paper. Paper
Size: XX/Paper Type: XX Load the size and type of paper in the paper source indicated.
Too many paper cassette units are
installed. Turn the power off and
uninstall the extra units. See your
documentation for details. You can install up to three optional paper cassette units.
Remove any extra units.
Unsupported Paper Cassette Units
have been installed. Turn the power
off and uninstall. For details, see
your documentation. Unsupported optional paper cassette units are installed.
Remove the unsupported units.
Cannot print because XX is out of
order. You can print from another
cassette. Turn the product off and then back on again. Reinsert the
indicated paper cassette. If the error persists, contact Epson for
support.