Scanning software does not operate correctly, Cannot start epson scan 2 – Epson WorkForce Pro WF-C8690 A3 Color MFP with PCL/PostScript User Manual

Page 411

411

Parent topic:

Solving Problems

Scanning Software Does Not Operate Correctly

If your scanning software does not operate correctly, try these solutions:

• Make sure your computer has adequate memory and meets the system requirements for your

operating system.

• Make sure your computer is not running in a power-saving mode, such as sleep or standby. If so,

wake your system and restart your scanning software.

• If you upgraded your operating system but did not reinstall your scanning software, try reinstalling it.

• In Windows, make sure your product is listed as a valid device in the

Scanners and Cameras

control

panel.

Parent topic:

Solving Scanning Problems

Related concepts

Uninstall Your Product Software

Cannot Start Epson Scan 2

If you cannot start Epson Scan 2, try these solutions:

• Make sure your product is turned on and any interface cables are securely connected at both ends.

• If your product is connected to a USB hub, connect it directly to your computer instead.

• If you scan at a high resolution over a network, a communication error may occur. Lower the

resolution.

• If you are scanning with the ADF, check that the document cover and ADF cover are closed.

• Make sure Epson Scan 2 is selected as your scanning program.

• Make sure your computer is not running in a power-saving mode, such as sleep or standby. If so,

wake your system and restart Epson Scan 2.

• Check the connection setting and test the connection using Epson Scan 2 Utility: