Epson WorkForce Pro WF-C8690 A3 Color MFP with PCL/PostScript - Manual (Page 367)

367
Cleaning the Paper Guide
If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink. If
paper does not feed correctly from the rear paper feed slot, you can use a cleaning sheet to clean the
rollers.
1. If printouts are smeared or scuffed, load plain paper in the paper source that you want to clean in this
size: A3 (11.7 × 16.5 inches [297 × 420 mm]).
2. Press the home button, if necessary.
3. Select Settings .
4. Select Maintenance .
You see a screen like this:
5. Scroll down and select Paper Guide Cleaning .
6. Select the paper source you want to clean then select Start .
7. Repeat these steps as necessary until the paper comes out clean. If you are using a cleaning sheet,
repeat these steps up to 3 times.
Note: If the paper is not clean after cleaning several times, try cleaning the other paper sources.
Parent topic: Adjusting Print Quality
Related topics
Loading Paper