Epson WorkForce Pro WF-C8690 A3 Color MFP with PCL/PostScript - Manual (Page 381)

381
Code Condition/solution
313
413
A communication error has occurred. Print a network connection report to check if the
product is connected to the network. Check the email server settings. The authentication
method of the settings and email server may not match. If the authentication method is
disabled, set the authentication method of the email server to
None .
314 The data size exceeds the maximum size for the attached files. Increase the Attached
File Max Size setting in the scan settings or lower the file size of the scanned image.
315 The memory is full. Retry after other ongoing jobs have finished.
322 An authentication error occurred. Check the Location settings.
323 A communication error has occurred. Check the Location settings or the network
connection.
324 A file with the same name already exists in the specified folder. Delete the duplicate file or
change the file name prefix in
File Settings .
325
326
There is not enough storage space available in the specified folder. Increase the storage
space in the specified folder, delete unnecessary files, or lower the file size of the
scanned image.
328 The destination was wrong or the destination does not exist. Check the Location
settings.
331 A communication error occurred. Print a network status report to check the product's
network connection.
332 There is not enough space available for saving the scanned files in the specified folder.
Reduce the number of documents or delete unnecessary files from the specified folder.
333 The destination could not be found because the destination information was uploaded to
the server before sending the scanned data. Select the destination again.
334 An error occurred while sending the scanned data.
341 A communication error has occurred. Make sure the product is connected to the computer
or network correctly. Make sure you have installed Document Capture Pro or Document
Capture. If you cannot clear the problem, contact your product administrator.
422 An authentication error has occurred. Make sure the settings are correct for the
Destination folder selected in Save/Forward Settings in the Receive Settings menu.