Epson WorkForce Pro WF-C8690 A3 Color MFP with PCL/PostScript - Manual (Page 297)

297
5. Select Extended Fax .
6. Select Store Fax Data to turn on the setting and select Close .
7. Select any other fax settings as necessary and select Close .
8. Select Store .
9. When you are ready to send the document, press the home button if necessary and select Fax
Box .
10. Select Stored Documents .
11. Select the stored fax job you want to send.
12. Select Start Sending .
Parent topic: Sending Faxes from the Product Control Panel
Related references
Fax Sending Options
Related topics
Placing Originals on the Product
Dialing Fax Numbers from a Connected Telephone
If you connected a telephone to the EXT port on your product, you can send a fax by dialing the fax
number from the connected telephone. If the recipient's phone number and fax number are the same,
you can speak to the recipient before sending the fax.
1. Place your original on the product for faxing.
2. Press the home button, if necessary.
3. Dial the fax number from the connected telephone. Speak to the recipient if necessary.
Note: If you are using a pre-paid calling card, enter the number and password required to use the
card before entering the destination fax number.
4. Select Fax on the LCD screen.