Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 99)

Menu List
99
22: CAMERA CONTROL
Menu item Value (bold text: default value) Explanation
CAMERA ID CAMERA 1 –16 Selects the camera to be controlled.
PROTOCOL
N/A, JVC, Panasonic,
Canon PTZ, VISCA over IP,
PTZOptics, Avonic
Specifies the camera’s protocol.
IP ADDRESS 192 .168 .0 .101 Input the camera’s IP address.
LOGIN NAME ENTER
Displays the LOGIN NAME screen.
Enter the log-in name needed to connect with the camera when “PROTOCOL” is “JVC.”
PASSWORD ENTER
Displays the PASSWORD screen.
Enter the password needed to connect with the camera when “PROTOCOL” is “JVC.”
CAMERA PRESET RECALL PRESET 1 –10
Selects a preset in which camera settings are preset. By pressing the [VALUE] knob you can recall
a preset from the camera.
By assigning a USER button to the camera control function, you can recall presets using the
buttons (p. 67).
ALL CAMERAS RECALL
Specifies how presets are recalled.
OFF Recall presets from the camera that is being controlled.
ON Simultaneously recall presets from all cameras (CAMERA 1–16).
CAMERA PRESET STORE PRESET 1 –10
This selects the preset in which camera settings will be registered. By pressing the [VALUE] knob
you can register the camera settings to a preset.
* Presets are saved in the camera itself.
PAN
Adjusts the horizontal position of the camera. When the cursor is located at this value, you can control the camera.
LEFT
While you hold down the [VALUE] knob, the camera faces left.
RIGHT While you hold down the [VALUE] knob, the camera faces right.
TILT
Adjusts the vertical position of the camera. When the cursor is located at this value, you can control the camera.
DOWN
While you hold down the [VALUE] knob, the camera faces up.
UP While you hold down the [VALUE] knob, the camera faces down.
SPEED 1– 12 –24 Adjusts the speed at which the camera changes direction.
ZOOM
Adjusts the camera’s zoom position. When the cursor is located at this value, you can control the camera.
WIDE (FAST)
While you hold down the [VALUE] knob, the camera zooms-out at high speed.
WIDE (SLOW) While you hold down the [VALUE] knob, the camera zooms-out at low speed.
TELE (SLOW) While you hold down the [VALUE] knob, the camera zooms-in at low speed.
TELE (FAST) While you hold down the [VALUE] knob, the camera zooms-in at high speed.
FOCUS (*18)
Adjusts the focal point of the camera. When the cursor is located at this value, you can control the camera.
NEAR
While you hold down the [VALUE] knob, the focus moves closer.
FAR While you hold down the [VALUE] knob, the focal point moves farther away.
AUTO FOCUS OFF, ON When this is “ON,” the focal point is set automatically.
EXPOSURE MANUAL , AUTO Specifies the exposure mode.
TALLY CH HDMI 1 –8, SDI 1–8
Specifies the connector from which the camera video is input. When the camera video from the
V-160HD is the final output, the camera’s tally light is lit.
(*18) This can be set if “AUTO FOCUS” is “OFF.”