Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 54)

54
Other Functions
Initializing a Macro
You can initialize a macro and completely erase its settings.
1 . [MENU] button
Ó
“MACRO”
Ó
select “INITIALIZE,” and press
the [VALUE] knob.
2 . Turn the [VALUE] knob to the macro you wish to select
(ALL, 1–100), and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 . Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
The macro is initialized. When the operation is finished, the
message “COMPLETE” appears.
4 . Press the [MENU] button to close the menu.
MEMO
About the macro demo data
Once you perform a factory reset (p. 73), any demo data you
have edited or deleted is restored to its factory default settings.
Renaming a Macro
Here’s how to rename a macro.
1 . [MENU] button
Ó
“MACRO”
Ó
select “ NAME EDIT ,” and
press the [VALUE] knob.
2 . Use the [VALUE] knob to select the macro (1–100) that
you want to rename, and then press the [VALUE] knob.
The MACRO NAME EDIT screen appears.
3 . Input the macro name.
* You can input up to 8 characters.
INIT:
Initializes the name.
Use the [VALUE] knob to move the cursor.
Pressing the [EXIT] button deletes the character at the cursor
location.
Press the [VALUE] knob to highlight the character at the
cursor location.
Use the [VALUE] knob to change the character, and press the
[VALUE] knob.
4 . When you have finished inputting the name, use the
[VALUE] knob to select “CLOSE,” and then press the
[VALUE] knob.
* If you decide to cancel, press the [EXIT] button.
5 . Press the [MENU] button to close the menu.