Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 19)

19
Video Operations
Changing the Mix/Wipe Pattern
You can change the transition pattern by which the mix/wipe occurs
and the direction of the wipe.
1 . [MENU] button
Ó
select “MIX/WIPE,” and press the [VALUE]
knob.
2 . Use the [VALUE] knob to select a menu item shown below,
and press the [VALUE] knob.
Menu item Explanation
MIX TYPE Specifies the transition pattern for mix.
WIPE TYPE Specifies the transition pattern for wipe.
WIPE DIRECTION Specifies the direction of wipe.
WIPE BORDER COLOR
Specifies the color of the border added to
the edge of the wipe area.
WIPE BORDER WIDTH
Specifies the width of the border added to
the edge of the wipe area.
3 . Use the [VALUE] knob to change the value of the setting,
and press the [VALUE] knob.
4 . Press the [MENU] button to close the menu.
MEMO
You can change the settings of the MIX/WIPE menu by holding
down the [TRANSITION] button and turning the [PGM/A-CENTER]
or [PST/B-CENTER] knob.
When mix is selected
Operation Explanation
[TRANSITION] + [PGM/A-CENTER] MIX TYPE
When wipe is selected
Operation Explanation
[TRANSITION] + [PGM/A-CENTER] WIPE TYPE
[TRANSITION] + [PST/B-CENTER] WIPE DIRECTION
[TRANSITION] + [PGM/A-CENTER]
(Turn while pressing)
WIPE BORDER COLOR
[TRANSITION] + [PST/B-CENTER]
(Turn while pressing)
WIPE BORDER WIDTH
Changing the Functions of the [CUT] and
[AUTO] Buttons
You can change what happens when you press the [CUT] and [AUTO]
buttons.
* In PGM/PST mode (p. 17), the functions of the [CUT] and [AUTO]
buttons are fixed.
1 . [MENU] button
Ó
“SYSTEM”
Ó
select “CUT SW ASSIGN” or
“AUTO SW ASSIGN,” and press the [VALUE] knob.
2 . Use the [VALUE] knob to select a function of the button,
and press the [VALUE] knob.
Value Explanation
CUT SW ASSIGN
Ç AUTO TAKE
When the video of the PST/B bus is selected, switches
to the video of the PGM/A bus.
Ç AUTO TAKE É Switches the video between PGM/A bus and PST/B bus.
Ç CUT
When the video of the PST/B bus is selected, switches
to the video of the PGM/A bus as a cut.
Ç CUT É
Switches the video between PGM/A bus and PST/B
bus as a cut.
Ç TRANSFORM
When the video of the PST/B bus is selected,
switches to the video of the PGM/A bus as a cut only
while you’re holding down the button.
AUTO SW ASSIGN
AUTO TAKE É
When the video of the PGM/A bus is selected,
switches to the video of the PST/B bus.
Ç AUTO TAKE É Switches the video between PGM/A bus and PST/B bus.
CUT É
When the video of the PGM/A bus is selected,
switches to the video of the PST/B bus as a cut.
Ç CUT É
Switches the video between PGM/A bus and PST/B
bus as a cut.
TRANSFORM É
When the video of the PGM/A bus is selected,
switches to the video of the PST/B bus as a cut only
while you’re holding down the button.
3 . Press the [MENU] button to close the menu.