Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 65)

65
Other Functions
Assigning Functions to the USER Buttons
You can assign the functions you want to the USER [1]–[4] buttons. By
doing this, the function you assigned is executed when you press a
USER button.
* The functions printed on the operation panel are assigned to the
USER buttons by factory default.
1 . [MENU] button
Ó
“SYSTEM”
Ó
select “ USER SW ASSIGN, ”
and press the [VALUE] knob.
The USER SW ASSIGN menu appears.
2 . Use the [VALUE] knob to select USER 1–4 “CATEGORY” and
“VALUE,” and press the [VALUE] knob.
3 . Use the [VALUE] knob to select the functions assigned to
the USER [1]–[4] buttons and then press the [VALUE] knob.
Á CATEGORY
Menu item Explanation
N/A No function is assigned.
FREEZE Turns the freeze function on/off.
AUTO SWITCHING
AUTO SWITCHING SW:
Turns the auto switching function on/off.
BPM TAP:
When “TYPE” in the AUTO SWITCHING menu
is “BPM SYNC,” you can set the BPM according
to the tempo at which you press the button.
The buttons flash in sync with the current
BPM setting.
INPUT ASSIGN
Each time you press a button, the video source
assigned to the specified cross-point button
switches to the following sources in order:
HDMI 1 У 8 У SDI 1 У 8 У STILL 1 Ó 16
STILL OUTPUT
Pauses the normal output, and previews or
final outputs a cut of the still image.
AUDIO INPUT MUTE
Turns the mute function on/off for the input
audio.
AUDIO OUTPUT MUTE
Turns the mute function on/off for the output
audio.
VOICE CHANGER SW Turns the voice changer on/off.
REVERB (MOMENTARY) Reverb turns on only while the button is pressed.
REVERB (ALTERNATE) Turns reverb on/off.
INPUT SCAN
Each time you press a button, the INPUT 1–10
video changes in order.
MEMORY SCAN
Each time you press a button, preset memories
1–30 are recalled in order.
REC CONTROL
Controls the recorder’s video record start/
stop if a recorder that supports REC control
functionality is connected (p. 65).
GPO (ONE SHOT) Outputs a control signal for 0.5 seconds.
GPO (ALTERNATE)
The control signal output is switched on/off
while the button is pressed.
CAMERA CONTROL Turns the camera control function on/off.
Bluetooth CONTROL
Turns the Bluetooth function on/off.
Long-press the button to begin pairing.
Á VALUE
Configures the detailed settings related to “CATEGORY.”
4 . Press the [MENU] button to close the menu.
Controlling an External Recorder’s Video
Record Start/Stop from the V-160HD
Connect a recorder that supports REC control functionality via HDMI
to control REC START/STOP on the recorder from the V-160HD (REC
control function).
For more about recorders that support the REC control function,
refer to the Roland website.
https://proav .roland .com/
Settings
USER button functions
To use the REC control function, you need to assign the recorder’s
video recording start/stop functions to a USER button.
* The record start/stop function is assigned to the USER [3] button by
factory default.
1 . Following the steps in “Assigning Functions to the USER
Buttons” on this page, assign the “REC CONTROL” function
to a USER button.
Turning REC control on/off
1 . [MENU] button
Ó
“VIDEO OUTPUT”
Ó
“HDMI OUT 1–3”
Ó
and set “REC CONTROL” to “ON.”
Operation
1 . Press the USER button to which REC START/STOP is
assigned.
Each time you press the button, the recorder switches between
video record start/stop.
Lit: Now recording
Unlit: Stopped
NOTE
The lights of the USER buttons show the status of the V-160HD,
and are not linked with the recorder’s status.
For instance, if the recorder stops recording for some reason
while the USER button are lit, these buttons do not automatically
go dark in response.