Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 101)

Menu List
101
Menu item Value (bold text: default value) Explanation
PANEL LOCK
ENTER Displays the PANEL LOCK menu.
Enable (ON) or disable (OFF) the panel lock.
Menu item Value Explanation
ALL SW & VOLUME OFF , ON The following settings are turned on/off together.
PGM/A 1–10 SW OFF , ON PGM/A cross-point [1]–[10] buttons
PST/B 1–10 SW OFF , ON PST/B cross-point [1]–[10] buttons
INPUT ASSIGN SW OFF , ON [INPUT ASSIGN] button
CUT SW OFF , ON [CUT] button
AUTO SW OFF , ON [AUTO] button
MODE SW OFF , ON [MODE] button
AUX SW OFF , ON AUX [1]–[10] buttons
MEMORY SW OFF , ON MEMORY [1]–[10] buttons
MACRO SW OFF , ON MACRO [1]–[10] buttons
TRANSITION SW OFF , ON [TRANSITION] button
VIDEO FADER OFF , ON Video fader
SPLIT BLOCK OFF , ON [SPLIT 1] [SPLIT 2] buttons, [PGM/A-CENTER] [PST/B-CENTER] knobs
SEQUENCER BLOCK OFF , ON Buttons in the SEQUENCER section
PinP & KEY 1–4 BLOCK OFF , ON Buttons and knobs in the PinP & KEY sections
DSK 1, 2 BLOCK OFF , ON Buttons and knobs in the DSK sections
MONITOR 1–4 SW OFF , ON MONITOR [1]–[4] buttons
OUTPUT FADE SW OFF , ON [OUTPUT FADE] button
CAPTURE IMAGE SW OFF , ON [CAPTURE IMAGE] button
USER 1–4 SW OFF , ON USER [1]–[4] buttons
AUDIO IN 1–3/4 VOLUME OFF , ON AUDIO INPUT LEVEL [1] [2] [3/4] knobs
AUTO MIXING SW OFF , ON [AUTO MIXING] button
AUX VOLUME OFF , ON [AUX] knob
USB STREAM VOLUME OFF , ON [USB STREAM] knob
MASTER OUTPUT VOLUME OFF , ON [MASTER OUTPUT] knob
AUX LINKED PGM
Specifies whether the same video as the final output is sent to the AUX bus (AUX link).
OFF
Use the AUX [1]–[10] buttons to select the video of the AUX bus.
When selecting a video that is not assigned to INPUT 1–10, set this in “AUX SOURCE” under the
VIDEO ASSIGN menu.
AUTO LINK
MANUAL LINK
AUX link is enabled, and the same video as the final output is sent to the AUX bus.
Temporarily disabling AUX link
When you press an AUX [1]–[10] button, the selection of the AUX [1]–[10] button is enabled (lit
green). You can select the video you want to send to the AUX bus.
Re-enabling AUX link
AUTO LINK
When you operate the [AUTO] button etc. to switch the final output video,
AUX link is automatically enabled.
MANUAL LINK
When you press the AUX [1]–[8] button that is currently selected (lit green),
AUX link is enabled.
CUT SW ASSIGN (*20)
Specifies the function of the [CUT] button.
Ç AUTO TAKE
When the video of the PST/B bus is selected, switches to the video of the PGM/A bus. The
transition time is specified by the TRANSITION TIME menu item “WIPE/MIX TIME.”
Ç AUTO TAKE É
Switches the video between PGM/A bus and PST/B bus. The transition time is specified by the
TRANSITION TIME menu item “WIPE/MIX TIME.”
Ç CUT When the video of the PST/B bus is selected, switches to the video of the PGM/B bus as a cut.
Ç CUT É Switches the video between PGM/A bus and PST/B bus as a cut.
Ç TRANSFORM
When the video of the PST/B bus is selected, switches to the video of the PGM/A bus as a cut
only while you’re holding down the button.
AUTO SW ASSIGN (*20)
Specifies the function of the [AUTO] button.
AUTO TAKE É
When the video of the PGM/A bus is selected, switches to the video of the PST/B bus. The
transition time is specified by the TRANSITION TIME menu item “WIPE/MIX TIME.”
Ç AUTO TAKE É
Switches the video between PGM/A bus and PST/B bus. The transition time is specified by the
TRANSITION TIME menu item “WIPE/MIX TIME.”
CUT É When the video of the PGM/A bus is selected, switches to the video of the PST/B bus as a cut.
Ç CUT É Switches the video between PGM/A bus and PST/B bus as a cut.
TRANSFORM É
When the video of the PGM/A bus is selected, switches to the video of the PST/B bus as a cut
only while you’re holding down the button.
OUTPUT FADE ASSIGN Specifies the function of the [OUTPUT FADE] button.
VIDEO FADE N/A, BLACK , WHITE, AUX The final output video is faded-in/out to the specified video.
AUDIO FADE DISABLE, ENABLE When this is set to “ENABLE,” the output audio also fades in/out along with the video.
(*20) This can be set if “PANEL OPERATION” is “A/B.”