Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 8)

8
Panel Descriptions
Connecting Bluetooth® Devices
Use the Bluetooth features of the V-160HD to connect it to your Bluetooth-compatible mobile device. This lets you do the following:
¹ Input the audio signals from your Bluetooth audio device.
¹ Use dedicated app “V-160HD RCS” or “V-160HD Remote” to remotely control the V-160HD from a computer or iPad (p. 74).
* For more on connecting (pairing) with a dedicated app, see the app’s Owner’s Manual.
Registering a Bluetooth Audio Device (Pairing)
To connect a Bluetooth device to this unit, you must pair (register)
the device with the unit.
Once you pair the device with this unit, there is no need to do it again.
* To connect a Bluetooth device that’s already paired, refer to
“Connecting an Already-Paired Bluetooth Device” on this page.
* See the Owner’s Manual for the Bluetooth device you want to pair
for details on the necessary operations.
1 . Place the Bluetooth device nearby the V-160HD.
2 . [MENU] button
Ó
“SYSTEM”
Ó
“Bluetooth”
Ó
select
“Bluetooth,” and press the [VALUE] knob.
3 . Use the [VALUE] knob to select “ON,” and press the
[VALUE] knob.
The V-160HD’s Bluetooth function turns on.
4 . Use the [VALUE] knob to select “PAIRING,” and press the
[VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
5 . Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
Pairing begins.
6 . Turn on the Bluetooth function of the Bluetooth device.
7 . Display the Bluetooth device screen on your Bluetooth
device, and select “Roland V-160HD Audio.”
Once pairing is successful, the message on the V-160HD changes
to “COMPLETE.”
8 . Press the [MENU] button to close the menu.
Connecting an Already-Paired Bluetooth Device
1 . Turn on the Bluetooth function of the Bluetooth device.
2 . Turn on the Bluetooth function of the V-160HD.
The onscreen STATUS display on the V-160HD changes to
“CONNECTED” when the connection is successful.
* If connection does not succeed, select “Roland V-160HD Audio” in
the Bluetooth device screen on your Bluetooth device.
MEMO
¹ You can also check the (Bluetooth) indicator for the
connection status.
Lit Connected Rapid blinking Now pairing
Unlit Bluetooth off Blinking Waiting for connection
¹ Pair again in the following cases:
– When the pairing data has been deleted from the Bluetooth
device
– When the V-160HD has been reset to its factory-set state
(p. 73).
¹ To remove the Bluetooth connection, deactivate Bluetooth on
the V-160HD or on your Bluetooth device.
¹ You can assign a function to a USER button for switching
Bluetooth on/off, or for pairing (p. 65).