Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 89)

Menu List
89
Menu item Value (bold text: default value) Explanation
AUX Adjusts the audio of the AUX bus.
AUX LEVEL -INF– 0 .0 –10.0dB
Adjusts the output volume.
This can also be adjusted by the [AUX] knob.
AUX MUTE OFF , ON Turns the mute function on/off. When this is “ON,” the output audio is temporarily silenced.
AUX DELAY
0 .0 –500msec
( 0 –25.0/29.9/30.0frame)
Adjusts the delay time of the audio.
Effect Outputs audio with a delay.
LIMITER OFF , ON
Turns the limiter on/off.
Effect Limits the output volume so that is does not exceed the specified threshold level.
* Distortion will occur if audio that exceeds the allowable range of the limiter is input.
THRESHOLD -40– -6 –0dB
Adjusts the level that becomes the threshold at which the limiter is applied. Compression is
applied to audio that exceeds the threshold. The volume level of audio that is output is limited so
as to stay to below the threshold.
AUX SEND
ENTER Displays the AUX SEND menu.
Menu item Value Explanation
AUDIO IN 1–3/4 -INF , 0dB
Adjusts the amount of audio sent to the AUX bus for each input. USB IN -INF , 0dB
Bluetooth IN -INF , 0dB
AUX SEND VIDEO
Selects how to configure the amount of signal sent to the AUX bus for HDMI/SDI IN 1–8.
AUTO Audio is automatically sent to the AUX bus in tandem with the AUX bus video selection.
MANUAL The amount of audio to send is adjusted manually.
HDMI IN 1–8 -INF , 0dB Adjusts the amount of audio sent to the AUX bus for each input.
* This can be set if “AUX SEND VIDEO” is “MANUAL.”
SDI IN 1–8 -INF , 0dB
AUX EFFECT
ENTER Displays the AUX EFFECT menu.
Menu item Value Explanation
AUDIO IN 1–3/4
USB IN
Bluetooth IN
HDMI IN 1–8
SDI IN 1–8
Sets whether to send audio from each input to the AUX bus with effects applied or not.
DRY
Sends the source audio with no effects applied.
PRE FADER
Sends the effect-applied audio.
The send volume is constant, regardless of the volume (INPUT LEVEL).
POST FADER
Sends the effect-applied audio.
The send volume can be changed by adjusting the volume (INPUT LEVEL).
USB OUT Adjusts the audio that is output from the USB STREAM port.
USB OUTPUT LEVEL -INF– 0 .0 –10.0dB
Adjusts the output volume.
This can also be adjusted by the [USB STREAM] knob.
USB OUTPUT MUTE OFF , ON Turns the mute function on/off. When this is “ON,” the output audio is temporarily silenced.
USB OUTPUT DELAY
0 .0 –500msec
( 0 –25.0/29.9/30.0frame)
Adjusts the delay time of the audio.
Effect Outputs audio with a delay.
EQUALIZER OFF , ON
Turns the equalizer on/off.
Effect Adjusts the volume for each frequency band.
Hi GAIN -15.0– 0 .0 –15.0dB Boosts or attenuates the high band.
Hi FREQUENCY 1.00– 10 .0 –20.0kHz Adjusts the center frequency when changing the volume in the high band.
Mid GAIN -15.0– 0 .0 –15.0dB Boosts or attenuates the middle band.
Mid FREQUENCY 20Hz– 2 .00kHz –20.0kHz Adjusts the center frequency when changing the volume in the middle band.
Mid Q 0.5– 1 .0 –16.0 Adjusts the width of the frequency band when boosting or attenuating the middle band.
Lo GAIN -12.0– 0 .0 –12.0dB Boosts or attenuates the low band.
Lo FREQUENCY 20Hz– 100Hz –2.00kHz Adjusts the center frequency when changing the volume in the low band.