Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 88)

Menu List
88
10: AUDIO OUTPUT
Menu item Value (bold text: default value) Explanation
OUTPUT ASSIGN Specifies the audio bus that is assigned to each connector.
AUDIO OUT (XLR) MASTER OUTPUT , AUX
MASTER OUTPUT:
All input audio is mixed and output (master output).
AUX:
Only the input audio sent to the AUX bus is mixed and output. This allows you to output audio that
is different than the master output.
AUTO:
The audio bus automatically switches according to the video bus assignment.
Video bus Audio bus
Others besides AUX MASTER OUTPUT
AUX AUX
AUDIO OUT (RCA) MASTER OUTPUT , AUX
PHONES OUT MASTER OUTPUT , AUX
USB OUT MASTER OUTPUT , AUX
HDMI OUT 1–3 AUTO , MASTER OUTPUT, AUX
SDI OUT 1–3 AUTO , MASTER OUTPUT, AUX
MASTER OUTPUT Adjusts the audio of the MASTER OUTPUT bus.
OUTPUT LEVEL -INF– 0 .0 –10.0dB
Adjusts the output volume.
This can also be adjusted by the [MASTER OUTPUT] knob.
OUTPUT MUTE OFF , ON Turns the mute function on/off. When this is “ON,” the output audio is temporarily silenced.
OUTPUT DELAY
0 .0 –500msec
( 0 –25.0/29.9/30.0frame)
Adjusts the delay time of the audio.
Effect Outputs audio with a delay.
LIMITER OFF , ON
Turns the limiter on/off.
Effect Limits the output volume so that is does not exceed the specified threshold level.
* Distortion will occur if audio that exceeds the allowable range of the limiter is input.
THRESHOLD -40– -6 –0dB
Adjusts the level that becomes the threshold at which the limiter is applied. Compression is
applied to audio that exceeds the threshold. The volume level of audio that is output is limited so
as to stay to below the threshold.
REVERB OFF , ON
Turns reverb on/off.
Effect Adds reverberation to the sound.
LEVEL 0 –127
Specifies the amount of sound that is returned from the reverb (return level). This adjusts the
depth of the overall reverb.
TYPE
Specifies the reverb type.
ROOM Produces the natural-sounding reverberation of a room.
HALL Produces the reverberation that is typical of a performance in a concert hall.
SIZE 1– 10 –20 Specifies the size of the room. The larger the value, the longer the reverb time.
EQUALIZER OFF , ON
Turns the equalizer on/off.
Effect Adjusts the volume for each frequency band.
Hi GAIN -15.0– 0 .0 –15.0dB Boosts or attenuates the high band.
Hi FREQUENCY 1.00– 10 .0 –20.0kHz Adjusts the center frequency when changing the volume in the high band.
Mid GAIN -15.0– 0 .0 –15.0dB Boosts or attenuates the middle band.
Mid FREQUENCY 20Hz– 2 .00kHz –20.0kHz Adjusts the center frequency when changing the volume in the middle band.
Mid Q 0.5– 1 .0 –16.0 Adjusts the width of the frequency band when boosting or attenuating the middle band.
Lo GAIN -12.0– 0 .0 –12.0dB Boosts or attenuates the low band.
Lo FREQUENCY 20Hz– 100Hz –2.00kHz Adjusts the center frequency when changing the volume in the low band.
MULTI BAND
COMPRESSOR
OFF , ON
Turns the multi-band compressor on/off.
Effect Applies separate compressors in individual frequency band.
Hi THRESHOLD -40– -20 –0dB
Specifies the threshold level at which the compressor is applied to the high band. Compression is
applied to audio that exceeds the threshold.
Hi RATIO
1.00 : 1, 1.12 : 1, 1.25 : 1, 1.40 : 1,
1.60 : 1, 1.80 : 1, 2.00 : 1, 2.50 : 1,
3 .20 : 1 , 4.00 : 1, 5.60 : 1, 8.00 : 1,
16.0 : 1, INF : 1
Specifies the amount of compression applied in the high band.
The state in which no compression is applied is defined as “1.”
Mid THRESHOLD -40– -16 –0dB
Specifies the threshold level at which the compressor is applied to the middle band. Compression
is applied to audio that exceeds the threshold.
Mid RATIO
1.00 : 1, 1.12 : 1, 1.25 : 1, 1.40 : 1,
1.60 : 1, 1.80 : 1, 2.00 : 1,
2 .50 : 1,
3.20 : 1, 4.00 : 1, 5.60 : 1, 8.00 : 1,
16.0 : 1, INF : 1
Specifies the amount of compression applied in the middle band.
The state in which no compression is applied is defined as “1.”
Lo THRESHOLD -50– -20 –0dB
Specifies the threshold level at which the compressor is applied to the low band. Compression is
applied to audio that exceeds the threshold.
Lo RATIO
1.00 : 1, 1.12 : 1, 1.25 : 1, 1.40 : 1,
1.60 : 1, 1.80 : 1, 2.00 : 1, 2.50 : 1,
3 .20 : 1 , 4.00 : 1, 5.60 : 1, 8.00 : 1,
16.0 : 1, INF : 1
Specifies the amount of compression applied in the low band.
The state in which no compression is applied is defined as “1.”