Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 98)

Menu List
98
21: LAN CONTROL
Menu item Value (bold text: default value) Explanation
CONFIGURE
Selects how settings are made for the IP address, subnet mask, and default gateway.
MANUAL
This is to be configured manually.
USING DHCP
The IP address and other information needed for connecting to the network is obtained
automatically from the DHCP server of the LAN.
IP ADDRESS (*17) ---.---.---.--- Specifies the IP address as appropriate for the network to which the unit is connected.
SUBNET MASK (*17) ---.---.---.--- Specifies the subnet mask as appropriate for the network to which the unit is connected.
DEFAULT GATEWAY (*17) ---.---.---.--- Specifies the default gateway as appropriate for the network to which the unit is connected.
NETWORK PASSWORD ENTER
Displays the NETWORK PASSWORD screen.
Set the necessary password for network connection, using four characters.
Show password
Password not set – – – –
Password set
* Input the password that’s set here when connecting a computer or other device on the same
network to access the V-160HD.
INFORMATION
ENTER Displays the LAN INFORMATION screen.
Displays the following information.
Item Explanation
STATUS Connection status
IP ADDRESS IP address
SUBNET MASK Subnet mask.
DEFAULT GATEWAY Default gateway
MAC ADDRESS MAC address
QR code
QR code for accessing the Smart Tally settings screen (Web)
* Note that the QR code is not shown if the V-160HD is disconnected from the network.
(*17) This can be set if “CONFIGURE” is “MANUAL.”