Roland V-160HD SDI/HDMI Streaming Video Switcher - Manual (Page 34)

34
Video Composition Operations
Finely adjusting the key color
You can make fine adjustments to the key color.
Use the [MENU] button
Ó
“DSK”
Ó
“DSK 1” or “DSK 2” to make the
settings for the following menu items.
Menu item Explanation
CHROMA
HUE WIDTH Adjusts the hue width.
HUE FINE Adjusts the center position of the hue.
SATURATION WIDTH Adjusts the saturation width.
SATURATION FINE Adjusts the center position of saturation.
Modifying the superimposed video
You can fill-in the superimposed video, or add an edge to it.
Use the [MENU] button
Ó
“DSK”
Ó
“DSK 1” or “DSK 2” to make the
settings for the following menu items.
Menu item Explanation
FILL TYPE If this is set to “MATTE,” the superimposed video is
filled in with the color specified in “MATTE COLOR.” MATTE COLOR
EDGE TYPE Specifies the type of edge.
EDGE COLOR Specifies the color of the edge.
EDGE WIDTH Specifies the width of the edge.
* This setting is in common with luminance key (p. 31).
Specifying a desired color as the key color
(sampling marker)
You can specify the key color to be made transparent by sampling
(detecting) a color from the video (sampling marker function).
You can also specify a key color other than green or blue.
1 . [MENU] button
Ó
“DSK”
Ó
“DSK 1” or “DSK 2
Ó
select
“SAMPLING MARKER,” and press the [VALUE] knob.
2 . Use the [VALUE] knob to select “ON,” and press the
[VALUE] knob.
The sampling marker ( ) used to sample (detect) the key color
is shown on the monitor of this unit and in the HDMI OUT 3
connector’s output video.
3 . Use the [VALUE] knob to select “POSITION H” or
“POSITION V,” and press the [VALUE] knob.
4 . Use the [VALUE] knob to adjust the position of the
sampling marker.
Menu item Explanation
POSITION H Adjusts the horizontal position.
POSITION V Adjusts the vertical position.
5 . Use the [VALUE] knob to select “SAMPLING EXECUTE,” and
press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
6 . Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
The key color is sampled.
The “HUE WIDTH,” “HUE FINE,” “SATURATION WIDTH,” and
“SATURATION FINE” settings are adjusted automatically.
7 . Press the [MENU] button to quit the menu.