ProSoft Technology PTQ-104S - Manual (Page 36)

Configuring the Processor with Concept 48TPTQ-104S Rev 1 ♦ 47TQuantum Platform
12TUser Manual 46TIEC 60870-5-104 Server for Quantum
3.3 Adding the PTQ Module to the Project
1 In the list of options on the left side of the PLC Configuration dialog box,
double-click I/O M AP . This action opens the I/O Map dialog box.
2 Click the E DIT button to open the Local Quantum Drop dialog box. This dialog
box is where rack and slot locations are identified.
Page 36 of 201 ProSoft Technology, Inc.
March 4, 2013