ProSoft Technology PTQ-104S - Manual (Page 16)

Start Here 48TPTQ-104S Rev 1 ♦ 47TQuantum Platform
12TUser Manual 46TIEC 60870-5-104 Server for Quantum
1.3.2 Connect the PC to the ProTalk Configuration/Debug Port
Make sure you have exited the Quantum programming software before
performing these steps. This action will avoid serial port conflict.
Using the supplied Null Modem cable, connect your PC to the
Configuration/Debug port on the ProTalk module as shown
To connect to the module’s Configuration/Debug serial port:
1 Start PCB, and then select the module to test. Click the right mouse button to
open a shortcut menu.
Page 16 of 201 ProSoft Technology, Inc.
March 4, 2013