ProSoft Technology MVI69-GEC - Manual (Page 77)

MVI69-GEC ♦ CompactLogix or MicroLogix Platform Contents
User Manual
ProSoft Technology, Inc. Page 77 of 86
February 18, 2014
Parameter Block
Offset
Start Description
Server[1].Timeout 41 This status value contains the total number of times a
connection timeout occurred on the socket.
Server[1].CfgErrWord 42 This bit mapped word defines the configuration errors for the
server.
Server[2].Enabled 43 This flag defines if the server is utilized. A value of 0
indicates the server is not used. Any other value indicates
the server is used.
Server[2].State 44 This flag defines the current state of the server.
Server[2].IP 45 This double-word value contains the IP address of the client
connected to the server.
Server[2].Port 47 This word value contains the port address for the client
connected to the server.
Server[2].Open 48 This status value contains the total number of times the
server performed an open operation.
Server[2].Established 49 This status value contains the total number of times a
connection was established on the socket.
Server[2].Closed 50 This status value contains the total number of times a close
operation was performed on the socket.
Server[2].RxCount 51 This status value contains the total number of messages
received by the server.
Server[2].RxOverflow 52 This status value contains the total number of messages
received that exceed the specified buffer size for the server.
Server[2].TxCount 53 This status value contains the total number of messages
transmitted by the server.
Server[2].TxOverflow 54 This status value contains the total number of transmit
messages that exceeded the specified maximum buffer size
for the server.
Server[2].Timeout 55 This status value contains the total number of times a
connection timeout occurred on the socket.
Server[2].CfgErrWord 56 This bit mapped word defines the configuration errors for the
server.
Reserved 57 This data area is reserved for future use.
Server States 58 to 62 State of each of the five servers.
Last Write Count 63 This word contains the number of characters written on
server from last BTR block.
If word 1 of the Input Image block is set to -2, the data for the last two servers is passed to
the processor. The format of this block is as follows:
Parameter Block
Offset
Start Description
Seq Number 0 Sequence number for this block.
Server Index 1 For this status data block, this word is set to a value of -2.
PassCnt 2 Program cycle counter
Product 3 Product name as ASCII string