ProSoft Technology MVI69-GEC - Manual (Page 39)

MVI69-GEC ♦ CompactLogix or MicroLogix Platform Contents
User Manual
ProSoft Technology, Inc. Page 39 of 86
February 18, 2014
6 After completing the module setup, the I/O configuration dialog box will display the
module's presence.
7 Copy the Ladder Rungs from the sample program.
8 Save and Downloading the Sample Program to the Processor (page 14) the new
application to the controller and place the processor in run mode.
The last step is to add the ladder logic. If you are using the example ladder logic, adjust the
ladder to fit your application. Refer to the example Ladder Logic section in this manual.
Download the new application to the controller and place the processor in run mode. If you
encounter errors, refer to Diagnostics and Troubleshooting (page 40) for information on
how to connect to the module's Config/Debug port to use its troubleshooting features.