ProSoft Technology MVI69-GEC - Manual (Page 75)

MVI69-GEC ♦ CompactLogix or MicroLogix Platform Contents
User Manual
ProSoft Technology, Inc. Page 75 of 86
February 18, 2014
6.3.3 DB9 to RJ45 Adaptor (Cable 14)
6.4 MVI69-GEC Status Data For Block Transfer
If word 1 of the Input Image block is set to -1, the data for the first three servers, the product
and block transfer data is sent in the block. The format of this block is as follows:
Parameter Block
Offset
Start Description
Seq Number 0 Sequence number for this block.
Server Index 1 For this status data block, this word is set to a value of -1.
PassCnt 2 Program cycle counter
Product 3 Product name as ASCII string
Rev 5 Revision level as ASCII string
OP 7 Operating system level as ASCII string
Run 9 Run number as ASCII string
BlkErrs.Read 11 Number of blocks transferred from module to processor
BlkErrs.Write 12 Number of blocks transferred from processor to module
BlkErrs.Parse 13 Number of blocks parsed by module
BlkErrs.Err 14 Number of block errors in module
Server[0].Enabled 15 This flag defines if the server is utilized. A value of 0
indicates the server is not used. Any other value indicates
the server is used.
Server[0].State 16 This flag defines the current state of the server.
Server[0].IP 17 This double-word value contains the IP address of the client
connected to the server.