ProSoft Technology MVI69-GEC - Manual (Page 10)

Contents MVI69-GEC ♦ CompactLogix or MicroLogix Platform
User Manual
Page 10 of 86 ProSoft Technology, Inc.
February 18, 2014
The following illustration shows the MVI69-GEC jumper configuration with the Setup Jumper
OFF.
Note: If you are installing the module in a remote rack, you may prefer to leave the Setup pins jumpered. That
way, you can update the module’s firmware without requiring physical access to the module.
1.5 Installing the Module
Before you attempt to install the module, make sure that the bus lever of the adjacent
module is in the unlocked (fully right) position.
Warning: This module is not hot-swappable! Always remove power from the rack before inserting or
removing this module, or damage may result to the module, the processor, or other connected devices.