ProSoft Technology MVI69-GEC - Manual (Page 48)

Contents MVI69-GEC ♦ CompactLogix or MicroLogix Platform
User Manual
Page 48 of 86 ProSoft Technology, Inc.
February 18, 2014
Warm Booting the Module
Caution: Some of the commands available to you from this menu are designed for advanced debugging and
system testing only, and can cause the module to stop communicating with the processor or with other devices,
resulting in potential data loss or other failures. Use these commands only if you fully understand their potential
effects, or if you are specifically directed to do so by ProSoft Technology Technical Support staff.
Some of these command keys are not listed on the menu, but are active nevertheless. Please be careful when
pressing keys so that you do not accidentally execute an unwanted command.
Press [W] from the Main menu to warm boot (restart) the module. This command causes the
program to exit and reload, refreshing configuration parameters that must be set on program
initialization. Only use this command if you must force the module to reboot.
Viewing Server Communication Status (Servers 0 to 4)
Use commands [1] [2] [3] [4] or [5] to view the communication status and statistics of the
specified server. This information can be useful when trouble-shooting communication
problems.
Viewing Client Communication Status (Clients 10 to 14)
Use commands [E] [F] [G] [H] or [I] to view the communication status and statistics of the
specified client. This information can be useful when troubleshooting communication
problems.