beautypg.com

ProSoft Technology MVI69-GEC User Manual

Page 74

background image

Contents

MVI69-GEC ♦ CompactLogix or MicroLogix Platform

User Manual

Page 74 of 86

ProSoft Technology, Inc.

February 18, 2014

You may see something like this:

If you see the status as running, you will not be able to use this com port for anything
other than communication to the processor. To stop the driver press the S

TOP

button on

the side of the window:

5 After you have stopped the driver you will see the following.

6 You may now use the com port to connect to the debug port of the module.

Note: You may need to shut down and restart your PC before it will allow you to stop the driver (usually only on
Windows NT machines). If you have followed all of the above steps, and it will not stop the driver, then make

sure you do not have RSLogix open. If RSLogix is not open, and you still cannot stop the driver, then reboot your

PC.