ProSoft Technology MVI69-GEC - Manual (Page 45)

MVI69-GEC ♦ CompactLogix or MicroLogix Platform Contents
User Manual
ProSoft Technology, Inc. Page 45 of 86
February 18, 2014
1 Click the Setup Connection button to configure the connection. On the Connection Setup
dialog box, select a valid com port or other connection type supported by the module.
2 For a serial connection, verify that the null modem cable is connected properly between
your computer’s serial port and the module. A regular serial cable will not work.
3 On computers with more than one serial port, verify that your communication program is
connected to the same port that is connected to the module.
If you are still not able to establish a connection, contact ProSoft Technology for assistance.
4.2.2 Navigation
All of the submenus in ProSoft Configuration Builder for this module contain commands to
redisplay the menu or return to the previous menu. You can always return from a submenu
to the next higher menu by pressing [M]
on your keyboard.
The organization of the menu structure is represented in simplified form in the following
illustration:
The remainder of this section shows you the menus available for this module, and briefly
discusses the available commands.