ProSoft Technology MVI69-GEC - Manual (Page 65)

MVI69-GEC ♦ CompactLogix or MicroLogix Platform Contents
User Manual
ProSoft Technology, Inc. Page 65 of 86
February 18, 2014
Parameter Block
Offset
Start Description
OP 7 Operating system level as ASCII string
Run 9 Run number as ASCII string
BlkErrs.Read 11 Number of blocks transferred from module to processor
BlkErrs.Write 12 Number of blocks transferred from processor to module
BlkErrs.Parse 13 Number of blocks parsed by module
BlkErrs.Err 14 Number of block errors in module
Client[0].Connected 15 This flag defines if the client is utilized and connected to a
server. A value of 0 indicates the client is not connected and
can be utilized for a connection. Any other value indicates
the client is connected and being used.
Client[0].State 16 This flag defines the current state of the client.
Client[0].IP 17 This double-word value contains the IP address of the server
connected to the client.
Client[0].Port 19 This word value contains the port address for the server
connected to the client.
Client[0].RxCount 20 This status value contains the total number of messages
received by the client.
Client[0].RxOverflow 21 This status value contains the total number of messages
received that exceed the specified buffer size for the client.
Client[0].TxCount 22 This status value contains the total number of messages
transmitted by the client.
Client[0].TxOverflow 23 This status value contains the total number of transmit
messages that exceeded the specified maximum buffer size
for the client.
Client[0].spare 24 Reserved for future use
Client[1].Connected 25 This flag defines if the client is utilized and connected to a
server. A value of 0 indicates the client is not connected and
can be utilized for a connection. Any other value indicates
the client is connected and being used.
Client[1].State 26 This flag defines the current state of the client.
Client[1].IP 27 This double-word value contains the IP address of the server
connected to the client.
Client[1].Port 29 This word value contains the port address for the server
connected to the client.
Client[1].RxCount 30 This status value contains the total number of messages
received by the client.
Client[1].RxOverflow 31 This status value contains the total number of messages
received that exceed the specified buffer size for the client.
Client[1].TxCount 32 This status value contains the total number of messages
transmitted by the client.
Client[1].TxOverflow 33 This status value contains the total number of transmit
messages that exceeded the specified maximum buffer size
for the client.
Client[1].spare 34 Reserved for future use