PLANET CS-2000 - Manual (Page 91)

CS-2000 UTM Content Security Gateway User’s Manual
- 85 -
5.5.1 Example 1 User & User Group Authentication
To plan the LAN user connect to the WAN through the authentication by policy. （To use the built-in
user and user group authentication.
Step1. In Authentication Æ User, to add the Authentication – User Name.
The Authentication – User Name setting
The user’s DNS server must correspond to the LAN interface through the CS-2000 appliance, in order to
enable the authentication.
Step2. In Authentication Æ User Group , add the new setting as following：
„ Click New Entry.
„ Name, enter auth_group.
„ Click Add, to add the available authentication user to the selected authentication user in
the same user group.
„ Click OK.
„ Complete the user group settings in authentication.
The user group authentication setting