PLANET CS-2000 - Manual (Page 559)

CS-2000 UTM Content Security Gateway User’s Manual
- 553 -
Example 2. Traceroute
Step1. In Diagnostic Æ Traceroute, the MIS engineer can set the CS-2000 send the packets to
specific address by traceroute command, to detects the status of WAN interface：
„ Enter the Destination IP / Domain name.
„ Enter the Packet size.( Default setting is 40 Bytes )
„ Enter the MAX Time-to-Live.( Default setting is 30 Hops)
„ Enter the Wait time.( Default setting is 2 seconds)
„ Select the source packets Interface.
„ Click OK.
Traceroute setting