PLANET CS-2000 - Manual (Page 279)

CS-2000 UTM Content Security Gateway User’s Manual
- 273 -
Icon Name Definition
PERMIT ALL
To permit the qualified packets can go through
WAN1, WAN2, and WAN3.
PERMIT WAN1 To permit the qualified Packets can pass by WAN1.
PERMIT WAN2 To permit the qualified Packets can pass by WAN2.
PERMIT VPN Trunk To permit the VPN Trunk qualified by Policy.
DENY To deny the Packets qualified by Policy.
PAUSE To stop the Policy.
Traffic Log
„ To record all the packets pass through the policy. The MIS engineer can click to view.
Statistics
„ Use the graphic charts to display the flow statistics.
IDP
„ IDP can filter the packets which applied policy.
Content Blocking
„ To manage the packet contents which applied policy.
IM/P2P Blocking
„ Can limit the connection of IM and P2P.
Anti-Virus
„ To detect if the files has attached virus through the HTTP / WebMail, FTP and SMTP policy.
Qos
„ To setup the MAX.Bandwidth and G.Bandwidth by policy. （The Bandwidth is shared by the user
qualified by policy .）
MAX. Concurrent Sessions Per IP
„ To assign the maximum sessions for every IP by policy management. If the sessions are over the limit,
then it will not build successfully.
MAX. Concurrent Sessions
„ To assign the maximum sessions by policy management. If the sessions are over the limit, then it will not
build successfully.