PLANET CS-2000 - Manual (Page 30)

CS-2000 UTM Content Security Gateway User’s Manual
- 24 -
System Name Setting and Email Setting
Step1. Company Name: Enter the unit name which the CS-2000 appliance objects to.
Step2. Device Name: Enter the title name of the CS-2000 appliance.
Step3. In E-Mail SettingÆEnable Email Alert Notification.
Step4. Sender Address: Enter the sender’s email address. (Required by some ISP).
Step5. SMTP Server: Enter the IP address of the SMTP server.
Step6. E-mail Address 1: Enter the first e-mail address to receive the notification.
Step7. E-mail Address 2: Enter the second e-mail address to receive the notification.
Step8. Click OK to enable this function.
Enable email alert notification
Click Mail Test to test if e-mail address 1 and e-mail address 2 can receive the notification or not.
If the MIS engineer wants to send the mails via the authentication, then he must enable SMTP Server
Authentication.