PLANET CS-2000 User Manual

Page 32

CS-2000 UTM Content Security Gateway User’s Manual

- 26 -

SIP protocol pass-through

Select this option to the device’s SIP protocol pass-through. Once this function is enabled, the SIP

packets will be allowed to pass-through via CS-2000.

Enable SIP protocol pass-through

To-Appliance Packets Log

Select this option to the device’s To-Appliance Packets Log. Once this function is enabled, every packet

to this appliance will be recorded for system administrator to trace.

Enable To-Appliance Packets Log

System Reboot

Step1.

To restart the CS-2000 appliance, Click Reboot near Reboot Multi Security Firewall

Appliance.

Step2.

It shows the confirm dialogue of Are you sure to reboot?

Step3.

Click OK to restart, or click Cancel to terminate the action.

Start to reboot