PLANET CS-2000 - Manual (Page 564)

CS-2000 UTM Content Security Gateway User’s Manual
- 558 -
12.6.1 Interface
Step1 Status Æ Interface, it shows all the interface information in CS-2000.
„ System Uptime：The operating uptime of CS-2000.
„ Active Sessions Number：It shows the real sessions pass through CS-2000.
„ MAC Address：The MAC address of interface.
„ IP Address/Netmask：The IP address and netmask of interface.
„ Rx Pkts , Err.Pkts：It shows the received packets and error packets of interface.
„ Tx Pkts , Err.Pkts：It shows the transferred packets and error packets.
„ Ping , HTTP , HTTPS：It shows if the user can ping the CS-2000 interface, or enter the Web
UI through HTTP and HTTPS.
„ Forwarding Mode：It shows the interface connection mode.
„ WAN Connection：It shows the WAN interface connection status.
„ DnS / UpS kbps：It shows the maximium downstream / upstream bandwidth in WAN. ( MIS
engineer can set the max downstream / upstream bandwidth in Interface)
„ DnStream Alloca.：The CS-2000 can allocate the downstream percentage depends on the
WAN interface network flow.
„ UpStream Alloca.：The CS-2000 can allocate the upstream percentage depends on the
WAN interface network flow.
„ PPPoE Con.Time：When using the PPPoE connection, it will show the connection uptime.
„ Default Gateway：It shows the WAN gateway address.
„ DNS 1：It means the DNS 1 server IP address applied from the ISP.
„ DNS 2：It means the DNS 2 server IP address applied from the ISP.