PLANET CS-2000 - Manual (Page 556)

CS-2000 UTM Content Security Gateway User’s Manual
- 550 -
Example 1. Ping
Step1. In Diagnostic Æ Ping, the MIS engineer can set the CS-2000 send the packets to specific
address, to detects the status of WAN interface：
„ Enter the Destination IP / Domain name.
„ Enter the Packet size. ( Default setting is 32 Bytes )
„ Enter Count value. ( Default setting is 4)
„ Enter Wait time. ( Default setting is 1 second)
„ Enter the source packets Interface.
„ Click OK.
Ping setting