PLANET CS-2000 - Manual (Page 75)

CS-2000 UTM Content Security Gateway User’s Manual
- 69 -
Normally, the default client port number is range from 0 to 65535. It is recommended not to modify the
port number range in Custom Service function.
To enter the port number in the client port, if the MIS engineer has to enter two different port numbers in
server port, then enter the range of 15328:15333. To enter the same port number in the server port, the MIS
engineer has to enter two same port numbers, for example, enter the range of 1720: 1720.