PLANET CS-2000 - Manual (Page 278)

CS-2000 UTM Content Security Gateway User’s Manual
- 272 -
Policy
Comment
„ The description of policy.
Source Address and Destination Address
„ The active connection is the source IP and the passive connection is the destination IP .
Service
„ It represents the service item. The MIS engineer can select to use the system default setting or choose
the Policy Object Æ Service Æ Custom, to use the custom setting.
Option
„ Use the icon to display as the option enabled.
Icon Name Definition
Schedule Enable the schedule auto run on certain time.
Authentication User Authentication is enabled.
Traffic Log Traffic Log is enabled.
Statistics Statistics is enabled.
IDP IDP is enabled.
Content Blocking Content Blocking is enabled.
IM/P2P Blocking IM/P2P blocking is enabled.
Anti-Virus Anti-Virus is enabled.
Qos Qos management is enabled.
Schedule
„ Set the schedule time by policy.
Authentication User
„ User has to pass the authentication, and then connect to the network by Policy.
VPN Trunk
„ To apply the IPSec and PPTP VPN into VPN trunk by policy.
Action
„ To assign the path when the data packets pass through the WAN1, WAN2, WAN3 or WAN4 in the
CS-2000 or select to deny.