PLANET CS-2000 - Manual (Page 53)

CS-2000 UTM Content Security Gateway User’s Manual
- 47 -
4.2 WAN
Set the WAN Interface Address
Step1. Interface Æ WAN, click Modify of WAN 1.
WAN 2/3 Interface’s settings are almost the same as WAN 1 setting. The difference is that WAN 2/3
has the additional Disable function. The MIS engineer can use this function to disable WAN Interface 2/3.
Disable the WAN interface
Step2. The way to test the connection (ICMP and DNS):
„ ICMP: enter the persistent ping IP. (Or click Assist).
„ DNS：Enter the DNS server IP address and domain name. (Or click Assist.)
„ Sets the interval seconds during the packets transferring. (Per seconds).
ICMP connection test
DNS connection test
Both of the two connection test is the standard to see if the WAN can work properly. The testing such as
the IP address, IP address for DNS server and the domain name all must be working forever long, or it will
make the CS-2000 appliance error.