PLANET IGS-10020HPT - Manual (Page 70)

User’s Manual of IGS-10020PT / IGS-10020HPT
70
The page includes the following fields:
Object Description
• User Name
A string identifies the user name whose entry should belong to. The allowed
string length is 1 to 32. The valid user name is a combination of letters, numbers
and underscores.
• Password The password of the user. The allowed string length is 0 to 32.
• Privilege Level The privilege level of the user. The allowed range is 1 to 15. If the privilege level
value is 15, it can access all groups, i.e. that is granted the full control of the
device. But others value need to refer to each group privilege level. User's
privilege should be same or greater than the group privilege level to have the
access to that group. By default setting, most groups privilege level 5 has the
read-only access and privilege level 10 has the read-write access. And the
system maintenance (software upload, factory defaults and etc.) need user
privilege level 15. Generally, the privilege level 15 can be used for an
administrator account, privilege level 10 for a standard user account and privilege
level 5 for a guest account.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the Users.
: Delete the current user. This button is not available for new configurations (Add new user)
Figure 4-2-6: User Configuration Page Screenshot
After changing the default password, if you forget the password, please press the “Reset”
button on the front panel of the Industrial Managed Switch over 10 seconds and then release.
The current setting includes VLAN, and will be lost and the Industrial Managed Switch will
restore to the default mode.