PLANET IGS-10020HPT - Manual (Page 506)

User’s Manual of IGS-10020PT / IGS-10020HPT
506
6.10 Link Aggregation Control Protocol Command
LACP Configuration
Description:
Show LACP configuration.
Syntax:
LACP Configuration []
Parameters:
: Port list or 'all', default: All ports
Example:
Show LACP configuration
IGS-10020HPT:/>lacp configuration
Port Mode Key Role
---- -------- ---- ------
1 Disabled Auto Active
2 Disabled Auto Active
3 Disabled Auto Active
4 Disabled Auto Active
5 Disabled Auto Active
6 Disabled Auto Active
7 Disabled Auto Active
8 Disabled Auto Active
9 Disabled Auto Active
10 Disabled Auto Active
LACP Mode
Description:
Set or show LACP mode.
Syntax:
LACP Mode [] [enable|disable]
Parameters: