PLANET IGS-10020HPT - Manual (Page 590)

User’s Manual of IGS-10020PT / IGS-10020HPT
590
6.26 Ethernet Ring Protection Switching Command
ERPS Command
Description:
Invoking an administrative command for a given protection group
[fs|ms|clear] : setting or clearing an administrative command for a given group
: forced a block on the ring port where this command is issued
: protection group id
Syntax:
Erps command [fs|ms|clear]
Parameters:
fs|ms|clear: administrative commands
: Port number
: protection group id 1 - 64
ERPS Version
Description:
Specifying protocol version for a given protection group
[v1|v2] : specifying protocol version for a given protection group
: protection group id
Syntax:
Erps version [v1|v2]
Parameters:
v1|v2 : ERPS protocol version to be supported
: protection group id 1 - 64
ERPS Add
Description:
create a new ethernet ring protection group
: protection group id