PLANET IGS-10020HPT - Manual (Page 114)

User’s Manual of IGS-10020PT / IGS-10020HPT
114
4.4.4 SFP Information
You can check the physical or operational status of an SFP module via the SFP Module Information page. This page shows the
operational status, such as the transceiver type, speed, and wavelength and supports distance of SFP module on a specific
interface. You can also use the hyperlink of port no. to check the statistics on a speficic interface. The SFP Module Information
screen in Figure 4-4-4 appears.
Figure 4-4-4: SFP Module Information for Switch Page Screenshot
The page includes the following fields:
Object Description
• Type Display the type of current SFP module; the possible types are:

1000Base-SX

1000Base-LX

100Base-FX
• Speed Display the speed of current SFP module. The speed value or description is
gotten from the SFP module. Different vendors of SFP modules might show
different speed information.
• Wave Length(nm)
Display the wavelength of current SFP module. The wavelength value is gotten
from the SFP module. Use this column to check if the wavelength values of two
nodes are matched while the fiber connection is failed.
• Distance(m)
Display the support distance of current SFP module. The distance value is gotten
from the SFP module.
• Temperature (C)
Display the temperature of current SFP module. The temperature value is gotten
from the SFP module.
• Voltage (V)
Display the voltage of current SFP module. The voltage value is gotten from the
SFP module.
• Current (mA)
Display the ampere of current SFP module. The ampere value is gotten from the
SFP module.
• TX Power (dBm)
Display the TX power of current SFP module. The TX power value is gotten from
the SFP module.