PLANET IGS-10020HPT - Manual (Page 622)

User’s Manual of IGS-10020PT / IGS-10020HPT
622
6.31 DIDO Command
DIDO DI Act
Description:
Set or show the system digital input0/1 action.
Syntax:
DIDO Di_act [first|second] [1|2] [enable|disable]
Parameters:
first : Digital Input/Output 0
second : Digital Input/Output 1
(default: Set or show digital input/output first(0)/second(1) select)
1 : System Log
2 : SNMP Trap
(default: set or show digital input 0/1 action)
enable : Enable digital input0/1 function
disable : Disable digital input0/1 function
(default: Set or show digital input/output/fault alarm 0/1 status)
DIDO DI Desciption
Description:
Set or show the system digital input0/1 description.
Syntax:
DIDO Di_desc [first|second] []
Parameters:
first : Digital Input/Output 0
second : Digital Input/Output 1
(default: Set or show digital input/output first(0)/second(1) select)
: Digital input0/1 described string. Use 'clear' or "" to clear the string In CLI, no blank or space characters
are permitted as part of a contact.