PLANET IGS-10020HPT - Manual (Page 235)

User’s Manual of IGS-10020PT / IGS-10020HPT
235
• DIP Filter
Specify the destination IP filter for this ACE.

Any: No destination IP filter is specified. (Destination IP filter is
"don't-care".)

Host: Destination IP filter is set to Host. Specify the destination IP
address in the DIP Address field that appears.

Network: Destination IP filter is set to Network. Specify the destination
IP address and destination IP mask in the DIP Address and DIP Mask
fields that appear.
• DIP Address When "Host" or "Network" is selected for the destination IP filter, you can enter a
specific DIP address in dotted decimal notation.
• DIP Mask
When "Network" is selected for the destination IP filter, you can enter a specific
DIP mask in dotted decimal notation.
 ICMP Parameters
Object Description
•
ICMP Type Filter Specify the ICMP filter for this ACE.

Any: No ICMP filter is specified (ICMP filter status is "don't-care").

Specific: If you want to filter a specific ICMP filter with this ACE, you
can enter a specific ICMP value. A field for entering an ICMP value
appears.
•
ICMP Type Value When "Specific" is selected for the ICMP filter, you can enter a specific ICMP
value. The allowed range is 0 to 255. A frame that hits this ACE matches this
ICMP value.
•
ICMP Code Filter Specify the ICMP code filter for this ACE.

Any: No ICMP code filter is specified (ICMP code filter status is
"don't-care").

Specific: If you want to filter a specific ICMP code filter with this ACE,
you can enter a specific ICMP code value. A field for entering an ICMP
code value appears.
•
ICMP Code Value When "Specific" is selected for the ICMP code filter, you can enter a specific
ICMP code value. The allowed range is 0 to 255. A frame that hits this ACE
matches this ICMP code value.
 TCP/UDP Parameters
Object Description
•
TCP/UDP Source Filter Specify the TCP/UDP source filter for this ACE.

Any: No TCP/UDP source filter is specified (TCP/UDP source filter
status is "don't-care").