PLANET IGS-10020HPT - Manual (Page 342)

User’s Manual of IGS-10020PT / IGS-10020HPT
342
4.16.6 LLDP PoE Neighbours
This page provides a status overview for all LLDP PoE neighbors. The displayed table contains a row for each port on which an
LLDP PoE neighbor is detected. The columns hold the following information: The screen in Figure 4-16-6 appears.
Figure 4-16-6: LLDP PoE Neighbour Screenshot
Please be noted that administrator has to enable LLDP port from LLDP configuration. Please refer to the following example as
shown in Figure 4-16-7 . If LLDP function from port1 to port3 is enabled, administrator has to plug a PD that supports PoE LLDP
function, and then administrator is going to see the PoE information of the PD from LLDP.
Figure 4-16-7: LLDP Configuration Screenshot